Ao Smith Water Heater Pilot Light Won't Light - maint
Ao smith water gas water heater:
Smith water heater won't stay on.
Turned the control knob to pilot and pressed.
I have a 2 years old a o smith gnr 50 200 water heater.
I timed it and there.
I tried lighting in following the directions on the water heater and it will not light.
There is no light on the water heater.
I have replaced the thermocouple and cleaned the flame arrestor, but the.
So i attempted to light the pilot doing the following:
I had a handyman come in and change the thermocouple on the water heater too, it still wont light.
I have replaced the thermocouple and cleaned the flame arrestor, but the.
So i attempted to light the pilot doing the following:
I had a handyman come in and change the thermocouple on the water heater too, it still wont light.
If you really want to keep the water heater going, consider replacing the.
I have taken very good care of them, i flush them once a year, change the anode rods as needed, keep them.
I have an ao smith water heater and the pilot suddenly won't stay lit.
I don't have any difficulty getting the pilot light lit as some other users have indicated.
But if that heater was kicking off from the thermal switch, that would need to be reset manually.
After my vacation, the pilot light went out.
Hello, i have an ao smith gcv 40 water heater.
Let an ao smith rep repair it.
The igniter is working as we see the initial spark but then it dies down when we click the.
🔗 Related Articles You Might Like:
Asurion Verizon Home Device Protect The Tyrant In My Abode: Why I Loathe My Group Home Manager Don't Be Left In The Dark: T-Mobile Outage Map UpdatesI have an ao smith water heater and the pilot suddenly won't stay lit.
I don't have any difficulty getting the pilot light lit as some other users have indicated.
But if that heater was kicking off from the thermal switch, that would need to be reset manually.
After my vacation, the pilot light went out.
Hello, i have an ao smith gcv 40 water heater.
Let an ao smith rep repair it.
The igniter is working as we see the initial spark but then it dies down when we click the.
I have an a. o. smith model gcv 50 100, 50 gallon natural gas water heater that will not stay lit and the pilot goes out.
The status red light stopped blinking and the water heater quit heating water.
You would only be charged labor.
There used to be a problem with it where the pilot wouldn't stay lit for more than 15 minutes after i would light it and turn the heater on.
After peeking through the little window, i see the pilot is lighting, but once i remove my finger.
It's the piece of metal coming out of the white insulator.
It looks atrocious and it should be shined up!
Nevermind that the click starter does not work, but to get around that, i manually lit the pilot, and everything was fine, but.
With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.
📸 Image Gallery
Hello, i have an ao smith gcv 40 water heater.
Let an ao smith rep repair it.
The igniter is working as we see the initial spark but then it dies down when we click the.
I have an a. o. smith model gcv 50 100, 50 gallon natural gas water heater that will not stay lit and the pilot goes out.
The status red light stopped blinking and the water heater quit heating water.
You would only be charged labor.
There used to be a problem with it where the pilot wouldn't stay lit for more than 15 minutes after i would light it and turn the heater on.
After peeking through the little window, i see the pilot is lighting, but once i remove my finger.
It's the piece of metal coming out of the white insulator.
It looks atrocious and it should be shined up!
Nevermind that the click starter does not work, but to get around that, i manually lit the pilot, and everything was fine, but.
With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.
Pilot light is lit but burner does not light.
There is residual gas inside the unit.
The status red light stopped blinking and the water heater quit heating water.
You would only be charged labor.
There used to be a problem with it where the pilot wouldn't stay lit for more than 15 minutes after i would light it and turn the heater on.
After peeking through the little window, i see the pilot is lighting, but once i remove my finger.
It's the piece of metal coming out of the white insulator.
It looks atrocious and it should be shined up!
Nevermind that the click starter does not work, but to get around that, i manually lit the pilot, and everything was fine, but.
With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.
Pilot light is lit but burner does not light.
There is residual gas inside the unit.
📖 Continue Reading:
Goodbye To Legends: The Heartbreaking Obituaries From Springfield Escape To Coastal Elegance: Embark On A Journey To Showcase Homes In Brewer, MaineIt looks atrocious and it should be shined up!
Nevermind that the click starter does not work, but to get around that, i manually lit the pilot, and everything was fine, but.
With this in mind, here are the most common reasons that a pilot won't light or won't stay lit and what you can do about them.
Pilot light is lit but burner does not light.
There is residual gas inside the unit.
